Page 16 - Barhale Catalogue Volume 1
P. 16
HEAD PROTECTION
HEAD PROTECTION
THE TECHNICAL BIT
HELMETS
EN 397:2012 – Industrial safety helmets - The standard that industrial safety helmets are tested to.
-20 C or -30 C - Tested at very low temperature.
o
o
+150 C –Tested at high temperature.
o
440 V a.c. – Tested for electrical insulation.
LD – Tested for lateral deformation.
MM – Resists molten metal splash.
BUMP CAPS
Bump Caps offer a lower level of protection and may be used in areas such as warehouses.
EN 812:2012 – Industrial bump caps.
-20 C or -30 C - Tested at very low temperature.
o
o
F - Resistant to flame.
440 V a.c. – Tested for electrical insulation.
ADDITIONAL STANDARDS
EN 50365:2002 – Electrically insulating helmets for use on low voltage installations.
A note to make about the above standard is that only non-vented helmets fall under that standard. Vented helmets are not
suitable for electrical insulation.
Disclaimer: Please note, this page is a guide to help you choose the right PPE for you. To find up to date information on standards please check the manufacturer’s website or HSE.
16 BCS Group | BCSGROUP.CO.UK
